+1 702-875-2703
• "Running like a Detroit Engine, WIDE OPEN!" Mon - Sat •
Used harvester cost 2026 price guide, Tigercat 1165 harvester

Used Harvester Cost in 2026: Real Prices and What Drives Them

Ask ten loggers what a used harvester costs and you’ll get ten answers, and all of them can be right. We’ve seen solid older machines go for around $100,000 and late-model units with low hours bring close to half a million. Here’s what we’re seeing on used harvester prices in 2026, using machines we actually have listed, and what pushes a price up or down.

Used Tigercat 1165 harvester with 534 harvesting head

What used harvesters are selling for right now

These are real asking prices on machines we had listed when we wrote this in fall 2026. Prices change as machines sell, but it gives you a straight picture of the market.

  • Older, higher-hour machines: a 2006 TimberPro 630B with a Kesla 30 head and about 10,800 hours is listed at $120,000.
  • Mid-age machines with plenty of work left: 2016 Ponsse Scorpion Kings with 11,000 to 13,000 hours are listed between $215,000 and $280,000, depending on the head and how they’re equipped.
  • Newer, low-hour machines: a 2018 TimberPro 735D with a Quadco head is $430,000, a 2018 John Deere 1470G with under 2,000 hours is $475,000, a 2024 Komatsu 951.1 with about 3,000 hours is $480,000, and a 2023 Tigercat 1165 with 1,200 hours is $495,000.

So a rough rule: plan on six figures for anything that will actually work every day. Under about $150,000 you’re usually buying an older machine that will need money spent on it. Over $400,000 you’re into late-model iron with a lot of life left.

What pushes the price up

The head

On a harvester the head is half the machine. A good head with a tight measuring system, healthy feed rollers and a sound saw box adds real value. A worn-out head can cost tens of thousands to rebuild, so always look at it as closely as the carrier.

Records and one owner

A machine that came out of one logging outfit that serviced it on schedule is worth more, period. When we can show a buyer the service history, the price holds.

Recent major work

A fresh engine, new pumps or a recent undercarriage, with receipts, is money you won’t have to spend next year.

Wheeled or tracked, and the size class

Big tracked harvesters for steep ground and large timber cost more than smaller wheeled cut-to-length machines. Buy for the wood you actually cut, not the biggest thing you can finance.

What pulls the price down

  • No service history, or a seller who gets vague when you ask
  • A head with worn feed rollers, a sloppy delimb knife setup or measuring that won’t hold calibration
  • Hydraulic leaks, cracked booms or welded-up crane sections
  • Electrical gremlins and warning lights nobody can explain
  • Machines that have bounced through several owners or auctions

A cheap price on a harvester is a reason to look harder, not a reason to hurry.

Budget for running it, not just buying it

The purchase price is only the start. Harvesters are expensive to keep in the woods. Knives, feed rollers, bars and chains are wear items, hoses and cylinders need attention, and tracked machines will need undercarriage work eventually. A machine that’s $50,000 cheaper but needs $80,000 in repairs right away isn’t a deal. Talk to your mechanic about what the machine you’re looking at typically needs in a year before you settle on a price.

How to buy one without getting burned

  1. Get the hours on the carrier and the head, and ask when the head was last rebuilt.
  2. Ask for a video of it cutting, not just idling in the yard.
  3. Pull a hydraulic and engine oil sample if you can.
  4. Have a mechanic or the brand dealer inspect it before any money changes hands.
  5. Make sure you know how it’s getting to you. Hauling a harvester across the country isn’t cheap, so get a freight quote early.

Quick answers

How many hours is a lot on a harvester?

Plenty of harvesters work well past 15,000 hours with good care. What matters more is how it was maintained and whether the big parts have been rebuilt.

Is a used harvester worth it over new?

For a lot of operations, yes. A well-kept machine a few years old can save you a big chunk of money and still give you years of work.

Which brands hold their value best?

Ponsse, John Deere, Komatsu, Tigercat and TimberPro all have strong followings in the used market. Parts and service near you should weigh into the decision as much as the brand.

Looking for a used harvester?

Check out the used harvesters we have for sale, or call Laxton Equipment at (702) 875-2703. Tell us what you cut and what you want to spend, and we’ll hunt down the right machine for you.